Your position: Home > Racing Drone > BNF

SPCMAKER 110NG 110MM FPV Racing Drone BNF Version RunCam Micro Swift 2 Camera Omnibus F4 flight controller 20A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)

Item Code: SPC110NG
Sold: 1
Write a review
Share this:
Have a question?
Market Price:
USD $0.00
Price:
USD
$180.00
Save $-180.00(1% Off)
    Please select the information you wantX
  • Voltage:
    11.1V
  • Model:
    DSM2 FRSKY FLYSKY FUTABA
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units
Add to Favorite Items
  • Description

Brand name: SPC Maker
Product model: SPC 110NG
Wheelbase: 110mm
Size: 130mm*145mm*30mm
Weight: 100g (without battery)
Flight weight: 150g(Include battery)
Motor: SPC Maker S1106 8000KV brushless motor
ESC: 28A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: RunCam Micro Swift 2 1/3 "600TVL ,NTSC/ FPV camera 2.3mm lens CCD camera
VTX: 5.8g 25MW-200MW 48CH Video transmitter
Flight controller: Omnibus F4 NANO
OSD: Betaflight OSD
Firmware of flight controller: betaflight_3.2.0_OMNIBUSF4SD
Flight time: 4 minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 500mAh 30C lipo battery
 
Model:F4 NANO (F4+28A 4 in 1)

Omnibus F4 NANO Flight Controller:
Size: 27mm*27mm
Mount hole: 20mm*20mm
2OZ*4 Layer Board
Processor: STM32 F405 MCU
Sensor: SPI Sensor ICM-20608
Firmware version: Betaflight 3.2.0
Target: betaflight_3.2.0_OMNIBUSF4SD
Receive:SBUS/IBUS/DSM/PPM ETC.
Telemetry Support

BS-28A 2-4S Blheli_S BB2 4 in 1 ESC:
Input Voltage: 2-3S Lipo battery
Constant Current: 28A
Peak Current: 35A
BEC Ouput: NO
Firmware: BLheli_S 16.6
Size: 27x31mm ( including pad)
Installing Hole: 20x20mm, M2.5
Weight: 4.1g
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: AON7418 TOP QUALITY MOSFET
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600.
 
Parameters
Model : RunCam Micro Swift 2
Image Sensor: 1/3" SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens：2.3mm Lens(M8) FOV145°
Signal System：NTSC
S/N Ratio：>60dB (AGC OFF)
Electronic Shutter Speed ：1/60~100,000
Auto Gain Control (AGC) ：Yes
Back Light Compensation (BLC)：Yes
Min. Illumination：0.01Lux@1.2F
WDR：D-WDR
DNR ：2DNR
Day/Night：Color/Auto/B&W
Power：DC 5-36V
Net Weight：5.6g
Dimensions：19mm*19mm*19mm
Transmission frequency group:：
Frequency band: 5362-5945MH
Channel: 48
A:Ch1:5740MHz       Ch2:5760MHz      Ch3:5780MHz    Ch4:5800MHz
  Ch5:5820MHz       Ch6:5840MHz      Ch7:5860MHz    Ch8:5880MHz
B:Ch1:5705MHz       Ch2:5685MHz      Ch3:5665MHz    Ch4:5645MHz
  Ch5:5885MHz       Ch6:5905MHz      Ch7:5925MHz    Ch8:5945MHz
C:Ch1:5865MHz       Ch2:5845MHz      Ch3:5825MHz    Ch4:5805MHz
  Ch5:5785MHz       Ch6:5765MHz      Ch7:5745MHz    Ch8:5725MHz
D:Ch1:5658MHz       Ch2:5695MHz      Ch3:5732MHz    Ch4:5769MHz            
  Ch5:5806MHz       Ch6:5843MHz      Ch7:5880MHz    Ch8:5917MHz
E:Ch1:5733MHz       Ch2:5752MHz      Ch3:5771MHz    Ch4:5790MHz                   
   Ch5:5809MHz       Ch6:5828MHz      Ch7:5847MHz    Ch8:5866MHz
F:Ch1:5362MHz       Ch2:5399MHz       Ch3:5436MHz    Ch4:5473MHz  
   Ch5:5510MHz       Ch6:5547MHz       Ch7:5584MHz    Ch8:5621MHz
Modulation type： FM
Ambient temperature：25℃
Video input voltage：1.0Vp-p,（75Ώ）
Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D16 mode),and XJT (D16 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support  TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG.
Receiver Setup and Binding Methods
 
Quads with DSM Compatible Receivers
Binding method for Spektrum radios:
Pair code: (for code, not external battery)
1. The receiver for the Cleanflight, Betaflight firmware flight control, you can enter the CLI command line
2. （set spektrum_sat_bind = 9 ）carriage return,
3. In the input （save） carriage return.
4. Disconnect the USB cable, re-power to the flight control, the receiver orange indicator light will flash, said the receiver into the code waiting mode.
5. Open the remote control, the remote control into the code mode, the success of the code, the orange light is always bright, no signal, orange light off.
 
Quads with FrSky Receivers
Binding with FrSky Taranis X9D Plus Transmitter
1.Turn on your Taranis X9D Plus transmitter,goto“Model Setup”(Press MENU and PAGE button once).In the“Internal FR”section,choose Mode=D16,Channel Range=CH1-16,Receiver No.01,and then click“Bind”,the transmitter will start beeping.
2.Power up the XM+ receiver while holding the F/S buttn(aka.Bind button).The LED on the receiver will start flashing,that means binding has completed.
3.Power off Transmitter and Receiver
4.Turn on the transmitter and power on the Receiver,you should see the Greed LED on the receiver,that means it has bound with your transmitter.
 
Quads with FlySky Receivers
Binding method for FlySky radios:
Support radios with the second generation protocol (AFHDS 2A).
1.Enter the binding mode in the radio.
2.Hold the binding button on receiver, and power it on. Rapid flash of LED indicates the receiver is in binding mode. If binding is successful, the LED light will change to slow flash.
3.Exit binding mode of the radio. The LED light on receiver should become solid, indicating completion of binding.
Enable s.Bus mode:
Output modes can be switched in lieu of normal communication between radio and receiver. Hold the binding button for 2 seconds to change to s.Bus mode. If LED light flashes rapidly two times and off for 1 second, then it is successfully changed to s.Bus output mode.
Quads with Futaba Compatible Receivers
 
Binding method for Futaba radios:
Compatible with Futaba radios support FASST.
1.Set the radio to FASST mode. Hold the binding button on receiver and then power it on. The red LED should flash rapidly. Release binding button the LED should flash red and green alternately, and then turns to solid green to indicate a successful binding. It may requires several trials to complete a binding. A solid red LED indicates the binding is not established.
2.Fail safe can be setup in the radio, and can be set after binding process. Hold the binding key for 2-3 seconds, the LED indicator of failsafe will flash rapidly and then turns to solid green, indicating it is in fail safe mode.
 
Package include:
1 x SPC Maker 110NG Frame
1 x Omnibus F4 NANO
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1106 7500KV brushless motor
1 x 28A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 4-blades propeller CW
4 x 50mm 4-blades propeller CCW
4x 50mm Propeller Protection Cover
1 x RunCam Micro Swift 2 1/3 "600TVL ,NTSC/ FPV camera 2.3mm lens CCD camera
1 x 5.8G 25mW-200mW 48CH /VTX
2 x 11.1V 500mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4x3 * 100mm nylon band
2x12mm * 150mm magic band
2x15mm * 50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter
 
Customer Reviews
Average rating:

Share your thoughts with other customers